HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 Video Issues

 
Greg Stanton_2
Occasional Contributor

ML350 Video Issues

Just installed my new ML350 and when it is plugged into the KVM, the video on all channels turned to crap, jumpie, flickers and one chammel has no video. When I unplug the 350 video, all channels are normal. I changed out the VGA cable, no change, tried a different KVM channel, again no difference. Any Ideas?
2 REPLIES
Oleg Koroz
Honored Contributor

Re: ML350 Video Issues

KVM failure? Another KVM?
What brand? COMPAQ/HP? Firmware?
All servers do the same? Or only one?
RILOE board Used, any other Video Controllers?
ML350 G1? Or G X? System ROM Updates?
Greg Stanton_2
Occasional Contributor

Re: ML350 Video Issues

KVM failure? -No, Works perfect w/o ML350 plugged in. In fact an older ML350 doesn't have this problem.
Another KVM? -Don't have one.
What brand?-
COMPAQ/HP? -THe ML350 is HP
Firmware?-
All servers do the same? No, they work fine.
Or only one? -Just the new ML350
RILOE board Used, any other Video Controllers? -No.
ML350 G1? Or G X? -HP ML350G4 X3.4 HP-SC641 US Rck Server
System ROM Updates?-