ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 g3 internal or external nic will not connect at 1000

 
bobw474
Occasional Visitor

ML350 g3 internal or external nic will not connect at 1000

The internal nic will not see a 1000gps connection.  It says cable unplugged.  Same with add on nic.

 

Any suggestions?

1 REPLY
BSeklecki
Advisor

Re: ML350 g3 internal or external nic will not connect at 1000

  1. show us 'ethtool -i eth0', 'ethtool eth0', and the concents of /etc/sysconfig/network-scripts/ifcfg-eth0

(replace 0 with the indexe)

 

pspci -v can be helpful too.

 

---

 

Also if its a Cisco switch on the other side, show us:

 

# show hard

#show run int gi0/1/2/ etc