ML350 g4p

[Nobody's Hero]

I have an ML350 running windows 2003 server.

In device manager :
Under SCSI and Raid Controller

I have:

LSI Adapter - Ultra320 SCSI 2000 series w/1020/1030 SCSIport.

Both show up with a bang (!) symbol.

How can I fix this?
Is there a driver I should be using that I dont have?

[Vijay_44]

assuming this is for the onboard ctrl - try updating the driver -

http://h18023.www1.hp.com/support/files/server/us/download/22559.html

[Nobody's Hero]

It is a PCI controler card. And I am having a fit trying to figure out how to update the driver. I am a UNIX person.

[Prashant (I am Back)]

Hi,

It seems to be the
Integrated Dual Channel Ultra320 SCSI Adapter
Refernce from :
http://h18004.www1.hp.com/products/quickspecs/12009_div/12009_div.html

Give a shot to this drive and check also
http://h18000.www1.hp.com/support/files/server/us/download/22559.html

REgards,
Prashant S.

[sverre rakkenes]

I have the same problem, and I have tried all the drivers in this thread, but still the '!' sign is on both my LSI adapter... any good ideas?