cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 g4p

Nobody's Hero
Valued Contributor

ML350 g4p

I have an ML350 running windows 2003 server.

In device manager :
Under SCSI and Raid Controller

I have:

LSI Adapter - Ultra320 SCSI 2000 series w/1020/1030 SCSIport.

Both show up with a bang (!) symbol.

How can I fix this?
Is there a driver I should be using that I dont have?
UNIX IS GOOD
4 REPLIES
Vijay_44
Honored Contributor

Re: ML350 g4p

assuming this is for the onboard ctrl - try updating the driver -

http://h18023.www1.hp.com/support/files/server/us/download/22559.html
There’s your problem!!! This thing is set to EVIL!
Nobody's Hero
Valued Contributor

Re: ML350 g4p

It is a PCI controler card. And I am having a fit trying to figure out how to update the driver. I am a UNIX person.
UNIX IS GOOD
Prashant (I am Back)
Honored Contributor

Re: ML350 g4p

Hi,

It seems to be the
Integrated Dual Channel Ultra320 SCSI Adapter
Refernce from :
http://h18004.www1.hp.com/products/quickspecs/12009_div/12009_div.html

Give a shot to this drive and check also
http://h18000.www1.hp.com/support/files/server/us/download/22559.html

REgards,
Prashant S.
Nothing is impossible
sverre rakkenes
Occasional Visitor

Re: ML350 g4p

I have the same problem, and I have tried all the drivers in this thread, but still the '!' sign is on both my LSI adapter... any good ideas?