cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 memory

 
SOLVED
Go to solution

ML350 memory

Hi,

I have an old ml350 server which is running a single slot 1 600mhz processor. I was wondering about a couple of things which i can't seem to find any documentation for.

firstly what is the specific memory these machines take as standard 133 dimms don't seem to work???

2ndly does any one know what processors i can put into this machine and where i could find them?

If anyone could point me in the right direction it would be very much appreciated.

many thanks

James
10 REPLIES
Prashant (I am Back)
Honored Contributor

Re: ML350 memory

Hi,

Well check the specifcation and optional option that can be done on ML 250 server
http://h18000.www1.hp.com/products/quickspecs/10492_na/10492_na.HTML
Please when ever you post mention generation of server or processor infomration

regards,
Prashant S.
Nothing is impossible
SAKET_5
Honored Contributor

Re: ML350 memory

Hey James,

It was hard to find a onestop shop for your request as you did not mention the generation of your Proliant ML350. I had to guess a bit and I found this very comprehensive specification type document, clik on specific peripherals and it brings a descripion and compatibility details.

Hope you would enjoy this one.

Have fun and don't forget to assign points:)

Regards,

Re: ML350 memory

Sorry, It is a first generation ml350 (hence the slot 1 chip) i've since noticed that later generations didn't have slot one setups.

Saket, what link are you refering too?

Thx James
Hemanth Gurunath Basrur
Honored Contributor
kcpant
Trusted Contributor

Re: ML350 memory

hi,
usually the server models does not accept standard DIMMs, because the server RAMs are generally ECC and have spd on it. this might be the case for your server. You should ask HP / other vendors who make RAMs for HP server standards, for the RAM you want to install on your server.

regards,
PreSales Specialist
Brian_Murdoch
Honored Contributor
Solution

Re: ML350 memory

Hi James,

Please see the attached document which lists the memory and CPU options available for the ML350 G1.

Regards,

Brian

Re: ML350 memory

Brian,

Thanks thats exactly what i was looking.

Thank you very much

James
Brian_Murdoch
Honored Contributor

Re: ML350 memory

James,

Just in case there is any confusion.
Your system board only supports up to 2GB of memory (4 X 512Mb dimms) and a 933Mhz CPU.

The details listed for the 1Ghz CPU and 4Gb of memory relate to the 1Ghz ML350 G1 model which has a different system board to your one. Sorry if the document was misleading in any way.

Regards,

Brian

Re: ML350 memory

Brian

Yeah theres a footer on the CPU and Memory lists explaining that :)

Cheers again

James
e4services
Honored Contributor

Re: ML350 memory

Maximum memory: 2048MB
Standard memory: 128MB removable
Slots/banks: 4 (4 banks of 1)
SDRAM, PC133 CL=3 ECC Registered

Intel does not show any conflicts in Slot 1 CPU of same clock speed, therefore any stepping CPU will function with the one you have. The only thing holding you back is that Compaq and HP used special heat sink/mounting of the CPU, so to guarantee that you get proper cooling, you should try and acquire the correct heat sink.
Hot Swap Hard Drives