HPE Community
ProLiant Servers (ML,DL,SL)
1753807 Members
7648 Online
108805 Solutions
New Discussion юеВ

Re: ML350 will not boot. CR59 is red.

 
Christopher Britt
New Member

тАО08-31-2010 08:32 AM

тАО08-31-2010 08:32 AM

ML350 will not boot. CR59 is red.

The server will not boot up. I have an amber light by the PPM2. I've replaced the PPM2 with no results. I also have a red led at CR59. I've removed all components down to barebones (1 DIMM, 1 processor.) no change. This is my domain controller so it is imperative that I get this running.
0 Kudos
Reply
2 REPLIES 2
almark
Occasional Advisor

тАО08-31-2010 09:45 AM

тАО08-31-2010 09:45 AM

Re: ML350 will not boot. CR59 is red.

try to boot server without second CPU and his memory.
try to boot server with BIOS recovery mode.
0 Kudos
Reply
Christopher Britt
New Member

тАО08-31-2010 09:50 AM

тАО08-31-2010 09:50 AM

Re: ML350 will not boot. CR59 is red.

I've removed the memory except one stick. I've removed one processor. Disconnected the DVD drive. Cleared out the NVRAM. It won't even POST.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.