HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 wont boot up and stay on the diagnostic screen

 
Fouad RAHMANI
Occasional Contributor

ML350 wont boot up and stay on the diagnostic screen

Hi All,

We have a ML350 G4p server with 5 scsi HDD drives on RAID 5.
The sevrer was shutdown for normally but when we wanted to start it up it doesn't boot.
After checking the HDD drives, the server shows a screen of Diagnostic Utility with three choices :
-Memory Test
-CPU Test
-Boot Disk Test

However, when i want to use the keyboard to make a choice, the keyboard don't work. I changed the keyboard and the problem is still the same.

Can you pls assist.

Thanks in advance.