ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350G4 Windows 2000 server

Niklas Banck
Occasional Contributor

ML350G4 Windows 2000 server

Hi!

I get this message in the eventlog everytime the server is restarted...

"Component: SCSI Agent Error: The SCSI controller on port 3 has been omitted. Cause: The SCSI Agent could not get the slot data for the controller."

"Component: SCSI Agent Error: The SCSI controller on port 2 has been omitted. Cause: The SCSI Agent could not get the slot data for the controller."

event id 1346

Any idéa????

Best regards

Niklas Banck
2 REPLIES
Oleg Koroz
Honored Contributor

Re: ML350G4 Windows 2000 server

Run over troubleshooting steps, Update Driver, Firmware if available for Array controller and Hard Drive, Reset Drive, if you have same Server swap Backplane if hot Plug used, swap cables, verify bent pins.
what source on the Event ID ?
here is 7.40 stuf if you need so
ftp://ftp.compaq.com/pub/products/servers/supportsoftware/ZIP/smartstart-7.40-0.zip
ftp://ftp.compaq.com/pub/products/servers/supportsoftware/ZIP/firmware_maintenance-7.40-0.zip
Terry Hutchings
Honored Contributor

Re: ML350G4 Windows 2000 server

What kind of adapters are installed in the pci slots? It's possible you could get this for 3rd party adapters.
The truth is out there, but I forgot the URL..