ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350G4P upgading memory 2GB + 2GB

 
ettore contarini
Occasional Visitor

ML350G4P upgading memory 2GB + 2GB

Hi, in a Proliant ML350 G4P with 1GB RAM (2x512MB in slot 1&2) I want adding memory, so I buyed 2x2GB HP certified memory and I've replaced the two original DIMM (always in slot 1&2) ... during boot, the server recognizes only 2GB memory (even I mount only one DIMM): the DIMM are both working, but I don't know HOW see 4GB ... have you any suggestion ??
Thanks in advice
eK
2 REPLIES

Re: ML350G4P upgading memory 2GB + 2GB

Hi,

Check the below Link;

http://h18004.www1.hp.com/products/quickspecs/12199_div/12199_div.HTML#Memory

regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
TarunJain
Respected Contributor

Re: ML350G4P upgading memory 2GB + 2GB

Hi Ettore,
It seems that only single memory module of 2GB is recognized (working).
Please check both the memory modules one by one.
4 GB memory should be detected on POST if both the memory modules are working
Do let us know the outcome and also the part number of memory modules if possible