ML350G4P with 6-Port SATA RAID - new logical drive

[noodles]

Hi,

we have a ML350G4P with HP 6-Port SATA RAID Controller (=Adaptec 2610SA).
We have 4 drives(250GB) as a RAID5.

Now we would like to add two 750GB SATA drives, configured as RAID1.
Does this controller support the creation of more than one logical drives with different RAID levels?

Thanks in advance!
Regards
/Stefan

[tomasz.puchalski]

Yes it should work
http://h20000.www2.hp.com/bizsupport/TechSupport/CoreRedirect.jsp?redirectReason=DocIndexPDF&prodSeriesId=443243&targetPage=http%3A%2F%2Fbizsupport.austin.hp.com%2Fbc%2Fdocs%2Fsupport%2FSupportManual%2Fc00771065%2Fc00771065.pdf

[noodles]

Hi,

thanks for your reply!
But the link does not work.

Could you post it again?

Thanks!

[tomasz.puchalski]

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00771065/c00771065.pdf

[noodles]

Hi,

thanks but that is not the Controller we are using...

Regards
/Stefan

[tomasz.puchalski]

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00285315/c00285315.pdf

[KarloChacon · Accepted solution]

hi Stefan

yes for sure

it will support different RAID levels
http://h18000.www1.hp.com/products/quickspecs/12091_div/12091_div.html

regards

[RaMpaNTe]

Yes it should. More info about the controller here.

http://h18004.www1.hp.com/products/quickspecs/12091_na/12091_na.html