ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350P tower to rack conversion

 
halcanites
Advisor

ML350P tower to rack conversion

I am in the process of converting said new server to be rack mounted.  Item# 8 on the install guide says to remove all screws on the base cover of the chassis.  One of the screws is so tight that it is starting to get rounded.  In reading the remainder of the instructions, I don't see anything why the base cover needs to be removed.  Can I just skip this process and not removed the base cover?