ProLiant Servers (ML,DL,SL)
1748255 Members
4225 Online
108760 Solutions
New Discussion

Re: ML350e G8 - Will not power on.

 
Redbaron1973
Occasional Advisor

ML350e G8 - Will now power on but will not post/ boot. pink screen!

Hi,  my server will not power on - it makes a rythmic tick noise from the psu and health light and power light dimly flash together  (red and green respectively)  once a second.

 

Is this a failed psu? or is it worse? 

4 REPLIES 4
Redbaron1973
Occasional Advisor

Re: ML350e G8 - Will not power on.

Ok, we have moved forward a little -  after leaving it an hour or so it decided to power on without my help!  However on power on,  no ILO,  and video output is  pink flashing screen?  any idea what this means? 

 

sudhirsingh
HPE Pro

Re: ML350e G8 - Will not power on.

Hi,

Did you swapped/replaced CPU recently ?

Please check for any bent/damaged pin on Processor socket on the system board.

 

If you feel this was helpful please click the KUDOS! thumb below!

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo

Redbaron1973
Occasional Advisor

Re: ML350e G8 - Will not power on.

1.  I have tried 2 difference cpu.

2.  there are no pins on this cpu?

 

sudhirsingh
HPE Pro

Re: ML350e G8 - Will not power on.

Hi,

Check Processor socket on the system board.

 

Regards,

Sudhir

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

>Accept or Kudo