ML350g3 array edition (SA641)

[Brandon M.]

Trying to install SBS2k3 Standard on this server on the initial restart after the menu driven GUI setup finishes where Windows is installed (not configured) I get a BSOD and immediate restart. I cannot read the BSOD because the ASR kicks in (I think) and restarts the machine automatically. I have tried to disable ASR in BIOS but to no avail... I used the most recent HPQ SA drivers as the F6 option of initial setup. This is not a SmartStart install as HPQ tells me that SBS2k3 is not supported until next release. The question is:

-Has anyone run into a similar problem and/or can anyone suggest a resolution. This will be my 5th W2K3 install on a Proliant box and my 2nd SBS2k3 on an ML350G3 server, never seen this before.

I appreciate anyone's suggestions.

[Brandon M.]

This has been fixed by using SmartStart to clear the system and re-installing. Guess it was a bum initial install

[Anthony Ostrander]

Hi,

What version of SmartStart are you using? v6.40 or v7?

Thanks.. tony