ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350g3 array edition (SA641)

Brandon M.
Occasional Visitor

ML350g3 array edition (SA641)

Trying to install SBS2k3 Standard on this server on the initial restart after the menu driven GUI setup finishes where Windows is installed (not configured) I get a BSOD and immediate restart. I cannot read the BSOD because the ASR kicks in (I think) and restarts the machine automatically. I have tried to disable ASR in BIOS but to no avail... I used the most recent HPQ SA drivers as the F6 option of initial setup. This is not a SmartStart install as HPQ tells me that SBS2k3 is not supported until next release. The question is:

-Has anyone run into a similar problem and/or can anyone suggest a resolution. This will be my 5th W2K3 install on a Proliant box and my 2nd SBS2k3 on an ML350G3 server, never seen this before.

I appreciate anyone's suggestions.
2 REPLIES
Brandon M.
Occasional Visitor

Re: ML350g3 array edition (SA641)

This has been fixed by using SmartStart to clear the system and re-installing. Guess it was a bum initial install
Anthony Ostrander
Occasional Contributor

Re: ML350g3 array edition (SA641)

Hi,

What version of SmartStart are you using? v6.40 or v7?

Thanks.. tony