ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350p Gen8 Linux Blink LEDs

 
SOLVED
Go to solution
mmlb
Occasional Visitor

ML350p Gen8 Linux Blink LEDs

I'm trying to control the disk enclosure's leds from Linux. They do not seem to show up as "generic" sas enclosures (can't use sg_ses or similar) as far as I can tell. How can I cause LEDs to blink so that I may identify disks as needed?

4 REPLIES 4
Kittenbelt68
Occasional Advisor

Re: ML350p Gen8 Linux Blink LEDs

Hi mmib,

There is no option to configure it at the OS end.

Regards

Srinath

 

Srinath_Raju
Frequent Advisor
Solution

Re: ML350p Gen8 Linux Blink LEDs

Hi mmib,

There is no option to configure it at the OS end.

Regards

Sr

I am a HPE Employee

Accept or Kudo

mmlb
Occasional Visitor

Re: ML350p Gen8 Linux Blink LEDs

I see, thanks for clearing up the confusion. That is very unfortunate and makes for more difficult server administration on my part.

Jimmy Vance
HPE Pro

Re: ML350p Gen8 Linux Blink LEDs


@mmlb wrote:

I'm trying to control the disk enclosure's leds from Linux. They do not seem to show up as "generic" sas enclosures (can't use sg_ses or similar) as far as I can tell. How can I cause LEDs to blink so that I may identify disks as needed?


Install the 'hpssacli' utility to access the disk controller. There is a commad to make the disk LED ID blink

 

No support by private messages. Please ask the forum! Accept or KudoI work for HPE