HPE Community
ProLiant Servers (ML,DL,SL)
1753485 Members
4357 Online
108794 Solutions
New Discussion

ML350p Gen8 Motherboard CPU socket issue

 
SOLVED
Go to solution
devonstar302
Occasional Visitor

‎10-26-2019 06:16 AM

‎10-26-2019 06:16 AM

ML350p Gen8 Motherboard CPU socket issue

I picked up the ML350p Gen8 server at work when they upgraded.  They took everything out of it of course. So I am putting it back together. I noticed that the "I.T." guy (who is a contract company guy) was none to careful about taking out the cpu they had installed.  Looks he bent socket pins. The second socket was unused for CPU 2.

 I am wondering if it is possible just to use CPU 2 since that socket looks good. Or is it a must that CPU 1 must be installed? I have been looking but have not found an answer on the issue. Thanks for any help with my question as it would be appreciated.

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎10-26-2019 02:09 PM

‎10-26-2019 02:09 PM

Solution

Re: ML350p Gen8 Motherboard CPU socket issue

Cpu 1 is mandatory.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
devonstar302
Occasional Visitor

‎10-26-2019 03:10 PM

‎10-26-2019 03:10 PM

Re: ML350p Gen8 Motherboard CPU socket issue

Pretty much what I was thinking. So parting it out then will be the answer.  Glad I only put 30 into it...  

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.