ML350p Gen8 - Sata motherboard connector speeds

[Palustec]

Hello everyone,

There are 3 sata connectors on the server motherboard (one used by optical drive).   Can someone tell me if they are Sata II or Sata III???

I was disappointed to learn the p420i runs at Sata II with Sata drives attached instead of SAS.

TIA

Palustec

[sudhirsingh]

Hi,

As for my understanding embedded SATA ports are designated for the optical drives and it runs at SATA 1.5 speed.

also

HP Smart Array P420i Controller-Specification

Disk Drive and Enclosure

6 Gb/s SAS (Serial Attached SCSI)

Interface - Transfer rate

3 Gb/s SATA (Serial ATA)

FYI,

SATA I (revision 1.x) interface, formally known as SATA 1.5Gb/s, is the first generation SATA interface running at 1.5 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 150MB/s.

SATA II (revision 2.x) interface, formally known as SATA 3Gb/s, is a second generation SATA interface running at 3.0 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 300MB/s.

SATA III (revision 3.x) interface, formally known as SATA 6Gb/s, is a third generation SATA interface running at 6.0Gb/s. The bandwidth throughput, which is supported by the interface, is up to 600MB/s. This interface is backwards compatible with SATA 3 Gb/s interface.

Regards,

Sudhir