ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G1 server firmware error

SOLVED
Go to solution
galminana
Occasional Visitor

ML370 G1 server firmware error

I have a Proliant ML370 G1 server. When i do the firmware updated, throw me an error and never start again.

exits something i can do to restore this?
where i can buy a new bios?

thanks
6 REPLIES
cnb
Honored Contributor

Re: ML370 G1 server firmware error

Follow the ROMPaq Disaster Recovery procedure in here:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01126876/c01126876.pdf

HTH,

galminana
Occasional Visitor

Re: ML370 G1 server firmware error

hi cnb, i already do this procedure without success, i think the bios maybe corrupted, and dont know where buy a new one
cnb
Honored Contributor

Re: ML370 G1 server firmware error

There are two (2) different procedures. One is used if only one ROM image is corrupted then there is the other procedure if both ROM images are invalid.

Which one did you try?

Are you sure the ROMpaq image on the diskette is valid?

What error message did you get during the recovery attempt(s)?

If you really feel you need to buy something then look for used Mobo.

galminana
Occasional Visitor

Re: ML370 G1 server firmware error

i try both procedures, the images are ok i test it with the one from the webpage(p17) and the one from the smart start, the beep error is 2 shorts, whats is mobo? i was thinking in replace the bios or the motherboard
cnb
Honored Contributor
Solution

Re: ML370 G1 server firmware error

Mobo = MotherBoard.

Points welcomed if the information was useful.

Rgds,
galminana
Occasional Visitor

Re: ML370 G1 server firmware error

thanks, i have buy another ml370 and copy the bios