ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G1 with DLT 40/80 - Boot to Tape Device?

Emma Greenwood
Occasional Contributor

ML370 G1 with DLT 40/80 - Boot to Tape Device?

I have created a Boot dr tape using Veritas Backup Exec 9.1, but I do not know how to get the server to boot to the tape device.

Can any one help?
4 REPLIES
Prashant (I am Back)
Honored Contributor

Re: ML370 G1 with DLT 40/80 - Boot to Tape Device?

Hi,

Are you refering to OBDR If yes then Press the keep the EJECT button pressed at post and then check again.

Regards,
Prashant S.
Nothing is impossible
Emma Greenwood
Occasional Contributor

Re: ML370 G1 with DLT 40/80 - Boot to Tape Device?

I tried this but it made no difference.
Prashant (I am Back)
Honored Contributor

Re: ML370 G1 with DLT 40/80 - Boot to Tape Device?

Hi,

Check this site good infomraiton regarding the compatiblity doccuments, It might help.

http://h18006.www1.hp.com/products/storageworks/drs/index.html

Regards,
Prashant S.
Nothing is impossible
Prashant (I am Back)
Honored Contributor

Re: ML370 G1 with DLT 40/80 - Boot to Tape Device?

Hi,

Please check this also
as on same site avable.
ftp://ftp.compaq.com/pub/products/storageworks/OBDR/OBDR%20F8%20Support%20Matrix.pdf

Regards,
Prashant S
Nothing is impossible