ProLiant Servers (ML,DL,SL)
1748171 Members
4421 Online
108758 Solutions
New Discussion юеВ

Re: ML370 G2 Rack Mount Problem

 
Donald Vitz
New Member

ML370 G2 Rack Mount Problem

I am converting a ML370 tower to rack mount. I ordered the rail kit, but the rails do not fit properly. The chassis has built in studs for the rail attachment, the kit rails are bolt on. Anyone know how I can get the correct rail kit?
3 REPLIES 3
Oleg Koroz
Honored Contributor

Re: ML370 G2 Rack Mount Problem

Donald Vitz
New Member

Re: ML370 G2 Rack Mount Problem

Thanks for the quick response. The actual rack is an APC Netshelter. The rail assembly works fine with the rack its just the attachment to the chassis that is out of sync. The conversion kit I got seems to have included the wrong rails, I will check the part number now. I checked one of our other servers and it seems to use the bolt-on rails. It is a little hard to see inside the rack. I don't want to get a whole new conversion kit, so I will probably just put it on a shelf.
Eric Schultz
New Member

Re: ML370 G2 Rack Mount Problem

Usually the coversion kit comes with rails. But you can find these kits on ebay.

Here is a link..

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5839659562