HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G2 Rack Mount Problem

 
Donald Vitz
Occasional Visitor

ML370 G2 Rack Mount Problem

I am converting a ML370 tower to rack mount. I ordered the rail kit, but the rails do not fit properly. The chassis has built in studs for the rail attachment, the kit rails are bolt on. Anyone know how I can get the correct rail kit?
3 REPLIES
Oleg Koroz
Honored Contributor

Re: ML370 G2 Rack Mount Problem

Donald Vitz
Occasional Visitor

Re: ML370 G2 Rack Mount Problem

Thanks for the quick response. The actual rack is an APC Netshelter. The rail assembly works fine with the rack its just the attachment to the chassis that is out of sync. The conversion kit I got seems to have included the wrong rails, I will check the part number now. I checked one of our other servers and it seems to use the bolt-on rails. It is a little hard to see inside the rack. I don't want to get a whole new conversion kit, so I will probably just put it on a shelf.
Eric Schultz
Occasional Visitor

Re: ML370 G2 Rack Mount Problem

Usually the coversion kit comes with rails. But you can find these kits on ebay.

Here is a link..

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5839659562