ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G2 keeps rebooting

Sjors van Ling
Occasional Contributor

ML370 G2 keeps rebooting

Sometime during this weekend my server must have crashed. Now it keeps rebooting. Power-up boot sequence seems normal, but immediatly following the boot-device screen (after which an attempt is made to boot from C drive) the system reboots. Reboots takes place before windows boot-screen is shown.

OS is Windows 2003 std svr.
Config:
dual PIII 1.13 GHz
1024MB RAM
Smart Array raid 1 config

Any ideas would be greatly appreciated!
2 REPLIES
The Spartan
Trusted Contributor

Re: ML370 G2 keeps rebooting

Boot from the smartstart CD.

1. Run the offline diags
2. Run the Array diags

Post them, I shall look into them..

Also,
upgrade firmware of the system andd the controller
If you are keen to win, you should be willing to lose.
Prashant (I am Back)
Honored Contributor

Re: ML370 G2 keeps rebooting

also check the IML logs as it can tell you the reason for previous failover.

Any led change for internal/external health led at time of reboot?

Prashant S.
Nothing is impossible