ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G3 (NETWARE)

Doug Roehm
Occasional Contributor

ML370 G3 (NETWARE)

Currently running server at 100MB Full Duplex. Just installed a GIG switch the server will connect to.. What is the best way to change the server to GIG connection.. (So I simply add/delete items in the inetcfg ??

Thanks in advance
3 REPLIES
Symen
Frequent Advisor

Re: ML370 G3 (NETWARE)

Just make the driver (Q57) load with speed 1000FD. Please note that 1000 Half duplex is not possible
Doug Roehm
Occasional Contributor

Re: ML370 G3 (NETWARE)

OK, but what about the G2 Servers that use the N100 versus the N1000 driver.. To change that, what is the best way??

Thanks again
Symen
Frequent Advisor

Re: ML370 G3 (NETWARE)

Oh you mean you want to keep running at 100 megabits?
Then you'll have to configure your switch to do so on that port. maybe configure your switch to auto-negotiate that port and configure your server to 100FD