ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G3 RAID Rebuild

 
SOLVED
Go to solution
Udo Kaune
Occasional Contributor

ML370 G3 RAID Rebuild

Hi,
I have some problems getting the rebuild of a RAID5 done. Basically I replaced a broken drive (1 of 4, ID 1 on port 1) and the server automagically tried to rebuild then RAID. But the process is stopped and an unrecoverable read error was reported by drive ID 3. Does that mean that drive 3 is also damaged somehow? Why do I get Failed Recovery Reads on the drive while the (not redundant) RAID seems to work?
Thanks in adcvance. Udo
3 REPLIES
Igor Karasik
Honored Contributor
Solution

Re: ML370 G3 RAID Rebuild

>>Does that mean that drive 3 is also damaged somehow?

Yes.
Probably best way in such situation is full backup -> delete RAID -> replace drive ID3 -> recreate RAID -> restore.



KarloChacon
Honored Contributor

Re: ML370 G3 RAID Rebuild

hi

also apply firmware CD...

having the latest firmware for the controller and HDDs avoid a lot of issues regarding HDDs task like yours

regards
Didn't your momma teach you to say thanks!
Udo Kaune
Occasional Contributor

Re: ML370 G3 RAID Rebuild

Thank you very much. Your quick response is appreciated!