HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G3 expansion slot 1 cannot boot smart array 641

 
Kelvin Ho
Occasional Visitor

ML370 G3 expansion slot 1 cannot boot smart array 641

other slot 2-6 no problem
7 REPLIES
Prashant (I am Back)
Honored Contributor

Re: ML370 G3 expansion slot 1 cannot boot smart array 641

Hi,

Please check the following details on your controller

Smart Array 641 Controller with Assembly #011818-001 (and NOT Assembly #5015652 on the cache module).
Smart Array 642 Controller with Assembly #011815-001 (and NOT Assembly #5015652 on the cache module).

If it there give it to hp and get it replaced.

Trust me :-)

Regards,
Prashant S.
Nothing is impossible
Kelvin Ho
Occasional Visitor

Re: ML370 G3 expansion slot 1 cannot boot smart array 641

Six PCI-X 64Bit/100-Mhz expansion slots (Five available on Array and High Performance Models)

what is the meaning of (five.....)?
Prashant (I am Back)
Honored Contributor

Re: ML370 G3 expansion slot 1 cannot boot smart array 641

hi

have you checked the above mentioned thing on your controller

YES/No.

Nothing is impossible
Stephen Kebbell
Honored Contributor

Re: ML370 G3 expansion slot 1 cannot boot smart array 641

Hi Kelvin,

might this have something to do with your problem?

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&taskId=110&prodSeriesId=316541&prodTypeId=15351&objectID=PSD_EL040721_CW01

And is says five available because in the High-Performance and Array Models, one of the slots is occupied by a Smart Array controller, meaning only 5 slots are free.

Regards,
Stephen
Terry Hutchings
Honored Contributor

Re: ML370 G3 expansion slot 1 cannot boot smart array 641

What do you have in the other pci slots? Will the controller initialize in slot 1, but not boot to OS or is it not seen at all in this slot?
The truth is out there, but I forgot the URL..
Kelvin Ho
Occasional Visitor

Re: ML370 G3 expansion slot 1 cannot boot smart array 641

"not secure in slot 1", never heard before
Kelvin Ho
Occasional Visitor

Re: ML370 G3 expansion slot 1 cannot boot smart array 641

initialize in slot 1, but not boot to OS