ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G3 reboots unexpected Blue Screen Trap

Solusjen
Occasional Visitor

ML370 G3 reboots unexpected Blue Screen Trap

Hi,

this server is rebooting almost every night on different times. It give me the following error.

Blue Screen Trap (BugCheck, STOP: 0x0000009C (0x00000000, 0x808A07A0, 0xBE000300, 0x1008081F))

We have upgraded to the latest Supportpack, latest Bios version but problem still exist. Does anyone have a solusion for this problem.
4 REPLIES
James ~ Happy Dude
Honored Contributor

Re: ML370 G3 reboots unexpected Blue Screen Trap

Hello,
Have you referred :
http://support.microsoft.com/kb/939315
yet ??

Regards,
Solusjen
Occasional Visitor

Re: ML370 G3 reboots unexpected Blue Screen Trap

thanks,

i will try this one tomorrow it is not when a shutdown is selected, but most of the time it during the backup when it is rebooting.

I will try
Gary Antonio Benavides
Trusted Contributor

Re: ML370 G3 reboots unexpected Blue Screen Trap

Hi!

If you have the latest drivers and firmware alreay installed in the server. Then it should be the processor. Most of the time this error is reported by the CPU via Interrupt 18
If it's not fun, you're not doing it right
James ~ Happy Dude
Honored Contributor

Re: ML370 G3 reboots unexpected Blue Screen Trap

Do check for the firmware of controller(connected to Tape drive); & If the back up is over the network, then refer:
http://support.microsoft.com/kb/936594

Regards,