1748180 Members
4328 Online
108759 Solutions
New Discussion юеВ

Re: ML370 G3

 
Paul walker_3
New Member

ML370 G3

I have an ML370 which has an error " Failed Hardware - base system Device" when it starts up.

cant see what that might be. Can you help?
5 REPLIES 5
Sunil Jerath
Honored Contributor

Re: ML370 G3

Hello Paul,
What's your system BIOS date?? If it's not uptodate then do update it. Here is the link:

http://h18007.www1.hp.com/support/files/server/us/locate/20_4307.html

This is assuming u have W2K.

Regards,
Paul walker_3
New Member

Re: ML370 G3

Yes its win2k and all firmware is up to date.

Windows 2000 reports the devices as being on..

1800h - 18ffh IRQ5

2800h - 28ffh IRQ10

Windows2000 is at SP4 but thinks it has no driver for these base devices??
Sunil Jerath
Honored Contributor

Re: ML370 G3

Hello Paul,
Does it mean that you have a 'Yellow Bang' in the device Manager??

Regards,
Paul walker_3
New Member

Re: ML370 G3

Yes. But I cant work out what driver it is looking for because it just describes it as a base system device..
Sunil Jerath
Honored Contributor

Re: ML370 G3

Hello Paul,
Please try the following only if you have those devices in your system which I believe you do:

Download the following Component packs from the hp Proliant Support Pack for Windows 2000 (version 6.10a, 4 Dec 02):

CP002527.exe -- hp Proliant NC67xx/NC77xx Gigabit Ethernet NIC Driver for Windows 2000
CP002585.exe -- hp Proliant Integrated Lights-Out Management Interface Driver for Windows 2000/.Net Server 2003
CP002567.exe -- hp Proliant iLO Advanced System Management Controller Driver for Windows 2000/.Net Server 2003

Please give this a try and let me know.

Regards,