HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G4 Error

 
SOLVED
Go to solution
Christopher R Mc Cay
Occasional Visitor

ML370 G4 Error

I replaced the system board in my Proliant ML370 G4 because of a defective SCSI port. Now I get the following error message with the system health light on ..

Serial presence detect (SPD) information - DIMM 6
Memory type SDRAM DDR2
DIMM Description SPS-MEM DIMM, 1GB, PC2-3200, 128Mx4
Spare Part Number 359242-001
Single-Bit Threshold Exceeded Status Correctable error threshold exceeded
Multi-Bit Status No DIMM errors detected
Single-Bit Threshold Count 3

What could be the problem??

HP suggested reseating the memory module(s)
1 REPLY
James ~ Happy Dude
Honored Contributor
Solution

Re: ML370 G4 Error

If Re-seating doesn't work, try swapping the 1 GB DIMM to another SLOT. If the Error follows the DIMM, replace DIMM, else, if Error Remains with the SLOT, replace System board!

It Should be the DIMM at fault.

Regards,
James.