ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G4 iLO Problem

Brian Burton
Advisor

ML370 G4 iLO Problem

Hello everyone I'm having an issue with the iLO on a ML370 G4.  I replaced the system board and the reconfigured the ip of the iLO but I cant access it.  Every looks good and green in systems management home page.  Nothing in any of the error logs.  The only thing that looks wrong is the ilo serial number.  it is showing as ilo and then some gibberish.  any ideas of what could be gping on?  

 

Oh and I just updated to the latest firmware and still the problem presists.  

3 REPLIES
Jimmy Vance
HPE Pro

Re: ML370 G4 iLO Problem

Have you tried removing power from the server to reset iLO?



__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
gregersenj
HPE Pro

Re: ML370 G4 iLO Problem

When you replace a system I/O bd.

In the RBSU:

You must set teh chassis serial number.

You must set the product number.

I will recommend to set time and date.

 

You do get a new ILo.

Set the IP

There's a tag comming along with the ILo.

Here you will find the new default ILo DNS and Administrator Password.

 

BR

/jag

gregersenj
HPE Pro

Re: ML370 G4 iLO Problem

The gibberish, may be due to an un-initilized NV RAM.

 

So Also. In the RBSU, set the server to default.

 

In in the ILo ORCA set the ILo to default.

 

BR

/jag