ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 G5 Dsk issue

 
Andrew_R
Occasional Contributor

ML370 G5 Dsk issue

Hi all.

I have a Proliant ML370 G5 with a bit of strange problem . There are 8 disks in the first drive bay and disks 5-8 are all showing red leds on the disks. The disks are healthy and not showing any errors in the systems management page. I have also check the array controller firmware and it is running the latest firmware.

Has anyone seen this issue before ?

Thanks for the help

Andrew

 

 

 

 

 

 

1 REPLY 1
Suman_1978
HPE Pro

Re: ML370 G5 Dsk issue

Hi,

Try some basic troubleshooting:
Switch OFF the server and Reseat the Hard Disk Drives back into the same bays.
Reseat the storage cables inside the server.

Also check the hard drive firmware by looking into the drive model number.  Check the drive model number in the HPESC Support Portal.


Thank You!
I am an HPE Employee

Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
Useful Links for ProLiant Servers

Accept or Kudo