HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 Hot Swap Cage

 
bannind
Occasional Visitor

ML370 Hot Swap Cage

I have a hot swap cage out of an old ML370 with the power cable that I am wanting to 'play around' with, creating an external hotswap enclosure. I cannot find the pin-out for the 6-pin power connector at the rear of the assembly. Pin 1 is orange, 2 & 3 - black, 4 - red and 5&6 black. I was hoping to splice the current wiring loom into a dual or triple molex connector. Is there any location to find the pinouts coming off the enclosure or off the motherboard to reference?

thanks,
dan