HPE Community
ProLiant Servers (ML,DL,SL)
1752790 Members
6074 Online
108789 Solutions
New Discussion юеВ

Re: ML370 and Smart Array 3200

 
SOLVED
Go to solution
Brad Lewis
Advisor

тАО09-02-2003 04:27 AM

тАО09-02-2003 04:27 AM

Re: ML370 and Smart Array 3200

No I didn't know you must use the RBSU to configure the RAID array. I know you must change the boot order and boot device to make sure the BIOS sees the array controller, but do not see any options to configure the RAID array itself.
Any help would be appreciated.

Brad
0 Kudos
Reply
Martin Breidenbach
Honored Contributor

тАО09-02-2003 05:54 AM

тАО09-02-2003 05:54 AM

Re: ML370 and Smart Array 3200

RBSU doesn't contain an array configuration program.

Newer Smart Array controllers include a ROM based array configuration utility (ORCA) that can be accessed via F8 during POST but Smart Array 3200 doesn't.
Reply
Brad Lewis
Advisor

тАО09-02-2003 06:30 AM

тАО09-02-2003 06:30 AM

Re: ML370 and Smart Array 3200

Thanks Martin. I will just install Win2000 without using SmartStart.

Thanks!

Brad
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.