ML370 and SmartArray 641 firmware update problem

[Juancho]

I updated ML370 and SmartArray 641 firmwares, but now, while initializating SmartArray on start-up, a warning message is shown suggesting to update the firmware to minimum version HPB5.

The smartarray firmware I installed is "Online ROM Flash Component for Windows - Smart Array 641/642 - version 2.58 A (7 Oct 05)"

Any ideas?

[Oleg Koroz]

run
http://h18023.www1.hp.com/support/files/server/us/download/24048.html

if newer not available verify
http://h18000.www1.hp.com/support/files/storage/us/index.html

and run from Maintenance tab of Firmware CD

[Prashant (I am Back)]

What i think to be specific.

Error is refering to HDD firmware.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_EX050119_CW01

-------------------------------------------------
BD07287B4C 356910-001 72-GB, Ultra320, Hot Plug 10K HPB5 (or later) CP005249

BD14687B52 356910-002 146-GB, Ultra320, Hot Plug 10K HPB5 (or later) CP005249

BD07297B57 356910-004 72-GB, Ultra320, Non-Pluggable 10K HPB5 (or later) CP005249

BD14697B58 356910-005 146-GB, Ultra320, Non-Pluggable 10K HPB5 (or later) CP005249

BD30087B53 356910-003 300-GB, Ultra320, Hot Plug 10K HPB5 (or later) CP005249


So, Upgrade the firmware of HDd that will do.

Regards,
Prashant S.

[Igor Karasik]

Warning message talks about SCSI drives firmware update and not about SmartArray firmware. Very often after SmartArray firmware update you will see message with suggestions for SCSI drives firmware update.
See KOV answer about how to update SCSI drives firmware.