ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370 does not recognise 2nd CPU

Ayman Altounji
Valued Contributor

ML370 does not recognise 2nd CPU

ML370 does not recognise 2nd CPU. Changed systemboard, power regulator board, swapped CPU?s from slot 1<->2 and back again, no result. Updated BIOS also. any suggestions are welcome
1 REPLY
Ayman Altounji
Valued Contributor

Re: ML370 does not recognise 2nd CPU

Some more information is needed.
Do you get any error message?
Does the processor initializes at post?
If yes, go to the advanced Future in the System Configuration Utility and change the APIC mode to " full table mapped" .
Thank you.