cancel
Showing results for 
Search instead for 
Did you mean: 

ML370

 
Vinay Patel_1
Occasional Visitor

ML370

I have a old ML370 /733MHZ server. I need to configure the Drive arry controllor to enable me to install a operating system. Currently when the server boots a message appears saying NO SCSI drives configured. I need a the drive array configuration program or a location where I can download SmartStart software for the Server.
3 REPLIES
Vijay_44
Honored Contributor

Re: ML370

What controller do you have? If itâ s a 4th or 5th generation controller you can use the ROM based ACU (ORCA). It you got the very old Smart 2 controller you can use SP6263, which is the bootable ACU. But if you have a 3200 controller you will need a Smart Start CD â it cannot be downloaded from th
There’s your problem!!! This thing is set to EVIL!
Vinay Patel_1
Occasional Visitor

Re: ML370

Its a Compaq 64bit/66 Wide Ultra SCSI
Vijay_44
Honored Contributor

Re: ML370

Looks like you are not using an array controller; are the drives connected to a SCSI controller?? If that's the case, make sure they are being ID'd on POST and boot off the OS cd and specify the controller driver during setup and you should be good to go.

What OS are you trying to install?
There’s your problem!!! This thing is set to EVIL!