ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370G4-Dual proc only showing 1 in bios screen

 
Nick Bauer
Occasional Contributor

ML370G4-Dual proc only showing 1 in bios screen

I removed one of the processors because i was going to put it in another machine, but plans chagned, so i put it back in. I cant remember what the bios showed before but i think it had Processor 1 and Processor 2 listed in the bios screen. Now only one shows, but if they screen matches the numbers on the processor cage, then the one i remove is showing, the secondary proc is not. Also, after i put the processor back in, the far left status light on the front panel (next to the UID button) turned red). I resat the processor, and it now works again. Any ideas? Thanks!