ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML370G6 boot hang on SLES10 SP3 install - netxen_nic.ko

 
sdrake48
Frequent Advisor

ML370G6 boot hang on SLES10 SP3 install - netxen_nic.ko

Customer Advisory - Document ID: c01955453
Says to create new initrd including netxen rpm and driver update disk for network installation. I followed these steps, but for the purpose of recreating SP3 media with the correct driver for nc375i nic. Unfortunately, even with new initrd and driver update disk included, booting the new SP3 media still hangs loading netxen_nic.ko. Any ideas? 'brokenmodules=' and driverupdate process needs to be eliminated. Thanks