ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML530 Power On failure

 
brian_236
Occasional Visitor

ML530 Power On failure

I just converted my ML530-G@ from a tower to a rack configuration. When I plug the power cables into the power supplies, the fans run for approximately 3 seconds, and then turn off. When I push the power button, notheing happens. I've already verified that I set the #3 switch to ON. Any suggestions?
1 REPLY
Jeff Mathews
Respected Contributor

Re: ML530 Power On failure

Did you open up the case and check for amber lights on the system board? This should show you what is causing the problem.

Jeff