HPE Community
ProLiant Servers (ML,DL,SL)
1753421 Members
4853 Online
108793 Solutions
New Discussion юеВ

Re: ML530 Series Drive Cage

 
Huts_1
New Member

тАО11-18-2004 01:40 AM

тАО11-18-2004 01:40 AM

ML530 Series Drive Cage

The server does not recognize SCSI ID 1 in cage A and 1-4 in cage B

Bios P19

Updated online/offline ROMs
0 Kudos
Reply
3 REPLIES 3
JohnWRuffo
Honored Contributor

тАО11-18-2004 02:20 AM

тАО11-18-2004 02:20 AM

Re: ML530 Series Drive Cage

Do you have both power supplies installed in the server? You need to have two in order to power the second cage.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
0 Kudos
Reply
Huts_1
New Member

тАО11-18-2004 04:02 AM

тАО11-18-2004 04:02 AM

Re: ML530 Series Drive Cage

There are 3 power sup There are 12 HD in the server 72G Ultra SCSI 3 are not in the list when creating array
Raid C 5302
0 Kudos
Reply
Michael Saurman
Advisor

тАО11-19-2004 12:24 PM

тАО11-19-2004 12:24 PM

Re: ML530 Series Drive Cage

Could be anything along the internal scsi subsystem.

SCSI Backplane
SCSI Cable
Array Controller

unfortunately, I have seen all those cause that issue.

If this is a new install, you can reseat the controller and cables and do a system erase. See what you come up with, you may get lucky.

Otherwise, start with your best guess. I would try another cable and/or controller because I have more of those around than ML530 backplanes.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.