ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML530 Series Drive Cage

 
Huts_1
Occasional Visitor

ML530 Series Drive Cage

The server does not recognize SCSI ID 1 in cage A and 1-4 in cage B

Bios P19

Updated online/offline ROMs
3 REPLIES
JohnWRuffo
Honored Contributor

Re: ML530 Series Drive Cage

Do you have both power supplies installed in the server? You need to have two in order to power the second cage.
Enjoy!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

Do you need help with your HP product?
Try this: http://www.hp.com/support/hpgt
Huts_1
Occasional Visitor

Re: ML530 Series Drive Cage

There are 3 power sup There are 12 HD in the server 72G Ultra SCSI 3 are not in the list when creating array
Raid C 5302

Re: ML530 Series Drive Cage

Could be anything along the internal scsi subsystem.

SCSI Backplane
SCSI Cable
Array Controller

unfortunately, I have seen all those cause that issue.

If this is a new install, you can reseat the controller and cables and do a system erase. See what you come up with, you may get lucky.

Otherwise, start with your best guess. I would try another cable and/or controller because I have more of those around than ML530 backplanes.