HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML530 Server, error on boot

 
Madjd
Occasional Contributor

ML530 Server, error on boot

Hi
I have a HP ML530 G1 server. On boot The following message appears:

Scanning for SCSI device ... no device found
press f1 to continue
F10 for system partition utilities

my questions are :
-How can I bypass this message to continue booting. I do not have any options allowing me to go into the BIOS.
-How can I enter the BIOS? I've tried F10, with CTRL and A (for advanced options) to no avail.

Regards, madjid
2 REPLIES
Terry Hutchings
Honored Contributor

Re: ML530 Server, error on boot

If you don't have the F10 partition installed then pressing ctrl A will not do anything. Is it installed? There is not a BIOS available on this machine which is loaded from ROM. If the partition is not installed, then it will require doing the same thing as described here:
http://forums2.itrc.hp.com/service/forums/questionanswer.do?threadId=941759

Just like I said in that post, I would recommend finding out what's causing this post message, then the F1 prompt will go away
The truth is out there, but I forgot the URL..
Terry Hutchings
Honored Contributor

Re: ML530 Server, error on boot

No scsi devices found is not the post error.
The truth is out there, but I forgot the URL..