ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML530 - SmartStart won't recognize my server model

SOLVED
Go to solution
David Watterson
Occasional Visitor

ML530 - SmartStart won't recognize my server model

Hi

Odd one this - recent versions of SmartStart (have tried 6.40 and 7.10) won't recognize that I have an ML530 (the Server Model field of the 'My Proliant Server' is blank) and hence won't allow me to use assisted setup.

HOWEVER, when I run the server diagnostics utility under maintenance within SmartStart it has no problem recognizing that I have an ML530.

For ref I have P19 ROM with latest firmware (18 Dec 2002) and a SmartArray 5300 with the latest firmware (updated today off 7.10 Firmware CD)

Any ideas?

Thanks

David
2 REPLIES
Vijay_44
Honored Contributor
Solution

Re: ML530 - SmartStart won't recognize my server model

The last supported version of the SmartStart on the ML530 is 5.5. You would need to get a 5.5 cd or do a manual install. You can run the SSCS 6.x and above on this server in the OS environment.
There’s your problem!!! This thing is set to EVIL!
David Watterson
Occasional Visitor

Re: ML530 - SmartStart won't recognize my server model

Thanks.