ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML570 BIOS Firmware Upgrade failed

vandevuer
Occasional Visitor

ML570 BIOS Firmware Upgrade failed

Hi,

I tried to flash the BIOS with the ROMpaq upgrade floppy and it fails with the error: Not enough disk space on the floppy drive. I restarted the server and it hangs, no video, no Memory check, nothing. I can't retry to flash the BIOS again.

Can someone help me?

Regards,
Raphael
4 REPLIES
Andrzej Kowalik
Honored Contributor

Re: ML570 BIOS Firmware Upgrade failed

Switch SW1:
you have to switch 1, 4, 5, 6 and flash BIOS again (black screan)
regards,
Andrzej
vandevuer
Occasional Visitor

Re: ML570 BIOS Firmware Upgrade failed

Hi Andrzej,

Than you for the response, but how to flash the BIOS again with a black screen?

Regards,
Andrzej Kowalik
Honored Contributor

Re: ML570 BIOS Firmware Upgrade failed

Just insert bootable (Rompaq) diskette with proper BIOS to diskette drive and plug the server
regards,
Andrzej
Oleg Koroz
Honored Contributor

Re: ML570 BIOS Firmware Upgrade failed

There will be beeps at start and when it Ends if it done successfully (aprox 5 min)
However, in the most cases if System Rom Corrupted it should gave ROM checksum Error and some beeps, so you might have other problem too