HPE Community
ProLiant Servers (ML,DL,SL)
1753766 Members
5569 Online
108799 Solutions
New Discussion юеВ

Re: ML570 Bios

 
Ian_194
Occasional Contributor

тАО08-18-2005 02:46 AM

тАО08-18-2005 02:46 AM

ML570 Bios

Can someone tell me how to get into the bios settings on a ML570? There seems to be no indication on what key to press at boot and I can't find it in the documentation that I have.

Thanks
0 Kudos
Reply
2 REPLIES 2
Steven Clementi
Honored Contributor

тАО08-18-2005 03:54 AM

тАО08-18-2005 03:54 AM

Re: ML570 Bios

Ian:

Usually, you would press F9 or F10, just after the NIC bios comes up.

The chain of events...

1. POST, bios check, memory count, etc
2. iLo config option
3. Smart Array (if you have one) startup and scan
4. NIC bios load
5. System prompt (F9, F10, F12) <----this is where you want to press F9
6. OS Start Up.


Steven
Steven Clementi
HP Master ASE, Storage, Servers, and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5, vSphere 6.x)
RHCE
NPP3 (Nutanix Platform Professional)
0 Kudos
Reply
Terry Hutchings
Honored Contributor

тАО08-18-2005 09:28 AM

тАО08-18-2005 09:28 AM

Re: ML570 Bios

If this server is the G1 model, then it will require pressing F10 to get into the system configuration utility.

If this isn't on the drive (immediately following post, but before loading the OS), then this will require downloading the utility, creating the four floppies in the set, and boot off the first one.
The truth is out there, but I forgot the URL..
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.