ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML570 G3 Fans blowing despite "power off"-status of server

Juergen Marz
Occasional Visitor

ML570 G3 Fans blowing despite "power off"-status of server

Hi there,

after powering down my ML570G3 server the fans don't stop blowing. Even after many hours of power-off status the fans still running.
Is this normal behavior or a HW-failure ?
(This is a test system in a test-environment where the server is powered down every evening)

I appreciate any input ...
Thanks and best regards,
Juergen
3 REPLIES
shanwang
Trusted Contributor

Re: ML570 G3 Fans blowing despite "power off"-status of server

i think its normal behavior. i used dl360g4 etc all the same ,its fans running after power down until you erased the power supplyso i think its normal behavior.
shanwang
Trusted Contributor

Re: ML570 G3 Fans blowing despite "power off"-status of server

normal behavior is the lower rate running
Todd Bailey_1
Occasional Contributor

Re: ML570 G3 Fans blowing despite "power off"-status of server

Is there anyway (a hardware hack?) to fix this engineering oversite?


It's a real pain having to pull the power every night to get the thing to truly shut off