cancel
Showing results for 
Search instead for 
Did you mean: 

ML570 and BIOS

SOLVED
Go to solution
grobelny
Occasional Advisor

ML570 and BIOS

How do I enter BIOS settings on ML570 server? I read that on Compaq servers it is not in ROM but on disk (F10 Setup partition or something like that). But when I press F10 nothing happens (just blank screen with blinking cursor in upper left corner). Probably the partition was erased. Is there a way of restoring it?
3 REPLIES
KarloChacon
Honored Contributor

Re: ML570 and BIOS

grobelny
Occasional Advisor

Re: ML570 and BIOS

As for SCU: where do I get softpaq from? Is it the thing described here: http://h20219.www2.hp.com/Hpsub/cache/509658-0-0-225-121.html ?

As for Smart Start CD: I tried version 7.70 and it had no useful options. I had Array Configuration Utility, System Erase Utility, some kind of diagnostics and information about PCI devices and that's basically it. No way to configure boot order. No way to restore F10 partition. Is version 7.70 too new for my hardware?
KarloChacon
Honored Contributor
Solution

Re: ML570 and BIOS

hi

for the SCU you only need floppies that's it.

download this file sp19619.exe (2.4 MB) follow the steps to create floppies and that's it that thing that you linked I really don't what it is

instruction(4 floppies by the way)
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-UNITY-I13227〈=en&cc=us&idx=1&mode=4&

and if it is a ML570 G1 - generation 1 - only SSCD 5.5

regards
Didn't your momma teach you to say thanks!