HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML570 drive issue

 
Patrick Turbett
Occasional Contributor

ML570 drive issue

I am servicing a ML570 with a Smartarray SCSI 5300 array. The system drive is setup as Raid 0+1(slots 0 and 1) with a spare(slot 2). Recently, drive 0 was taken off line by the contoller(Its fault indicator was on.) and drives 1 and 2 were working. I acquired a new drive and put it in slot 0. I thought it would be rebuilt by the controller once it was installed. Instead, it shows fault as did the drive which was replaced. Does something else need to be dome?