ProLiant Servers (ML,DL,SL)
1752666 Members
5486 Online
108788 Solutions
New Discussion юеВ

Re: ML570 repetitive power on

 
Trevor Meredith
Advisor

ML570 repetitive power on

I'm working on a Proliant ML570T01
It has redundant power supplies, redundant fans, Two processors.
When the power cord is connected to the power supplies, all the fans spin up for about two seconds, then they go off, after about eight seconds they come on again, and then go off.
This continues for as long as the power is plugged in.
I've tried one power supply at a time, disconnected powerand cables to all the peripherals (drive cage, etc.), disconnected the power switch, reseated peripheral board, memory board, processors.
No change
Any suggestions?
Thank you.
'HP 9000' The best server I've worked on.
5 REPLIES 5
Prashant (I am Back)
Honored Contributor

Re: ML570 repetitive power on

Hi,

check with these options.
Clear nvram
still same then
sw1 male switch 4 = on
then put bios floppy in server then check.

hope it helps

Prashant S.
Nothing is impossible
Trevor Meredith
Advisor

Re: ML570 repetitive power on

Thanks for the suggestion, Will let you know how this goes.
'HP 9000' The best server I've worked on.
Prashant (I am Back)
Honored Contributor

Re: ML570 repetitive power on

suspecting mb let see
Nothing is impossible
Trevor Meredith
Advisor

Re: ML570 repetitive power on

mb as in memory board or motherboard(system board).

I have a feeling it's the motherboard, will order a replacement.
'HP 9000' The best server I've worked on.
Prashant (I am Back)
Honored Contributor

Re: ML570 repetitive power on

mother board my friend
i think that is culprit

Prashant S.
Nothing is impossible