ML570G2 cable management arm connecting to a standard Knürr server rack sized 600mm x 1000mm

[James Skipper_1]

We have a number of ML570 G2 servers that have been racked in 3rd party Knürr racks. The cable management arm does not match up with any of the holes at the back of the rack and therefore the management arm is unsecured at the moment. I have found a part number 274739-B21 ML570G2 Third Party Rack Kit on the quick specs for this server. Does anyone know whether this would resolve the issue and allow the management arm to be secured to the back of this style rack

[James Skipper_1]

Rack type is a Knurr - characters not translated very well.

[Prashant (I am Back)]

Hi,

As the following site
http://vztxesppro3.cce.hp.com/hpparts/default.asp?mscssid=QG89JW3H8GCA9LQJ0DGBP7NNCHAHDJQB

it is not avaible as per information i have it will solve our purpose.

Regards,
Prashant S.