ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

ML570G2 with NIC Teaming problems

ML570G2 with NIC Teaming problems

Is anyone having issues with switch-assisted load balancing on NC3134's and the 6.4 support pack? I get a failure in my team everytime I apply the latest teaming software and driver from 6.4. Rolling back to 6.3 resolves the issue, so I know I am set up properly on the Cisco.

I install 6.4 drivers and teaming agent, configure for switch assisted load balancing, and reboot. The team comes up with one of the adapters failed. The same thing occurs if I try the fault tolerant config.

Server is an ML570G2 with one embedded NC3163 and an NC3134 in PCI slot 5. Any help is appreciated.
2 REPLIES

Re: ML570G2 with NIC Teaming problems

Anyone? Anyone?
Rich Greiner
Occasional Contributor

Re: ML570G2 with NIC Teaming problems

We encountered the same issue. By going into device manager and disable the two internal scsi devices. They conflict with the imbedded 3163. You can do this at post or in device manager.

Rich